Safety Data Sheet - TPO Free Builder Gel

1.   Chemical Product and Company identification  

Company Name:	Claw Culture Cosmetics Ltd
Product Name:	Builder Gel
Product Type:	Ultraviolet Gel
Product Use:	Nail Gel

 

2.   Ingredients 

Chemical Components	CAS	NO INCI NAME	Concentration WT%
Acrylates Copolymer	25035-69-2	Acrylates Copolymer	45-60
Isobornyl Acrylate	5888-33-5	Isobornyl Acrylate	10-25
Dimethicone	9016-00-6	Dimethicone	2-8
Hydroxypropyl Methacrylate	27813-02-1	Hydroxypropyl Methacrylate	5-15
Ethyl Trimethylbenzoyl Phenylphosphinate	84434-11-7	Ethyl Trimethylbenzoyl Phenylphosphinate	1-5
TMO	270586-78-2	TMO	0.5-1.5
May Contain [+/-]:
Iron hydroxide oxide yellow	51274-00-1	CI 77492	0-1
Sodium aluminosilicate violet	12769-96-9	CI 77007	0-1
Bismuth chloride oxide	7787-59-9	CI 77163	0-3
Diron trioxide	1309-37-1	CI 77491	0-1
CI 73360	2379-74-0	CI 73360	0-1
CI 15800	6371-76-2	CI 15800	0-1
CI 77891	13463-67-7	CI 77891	0-1
CI 77266	7440-44-0	CI 77266	0-1

 

3.   Hazards Identification

 Emergency Overview

 Physical state: Liquid HEALTH: 1* Colour: transparent FLAMMABILITY: 2 Odor: light PHYSICAL HAZARD: 1 Personal Protection: See Section 8

WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED. DO NOT SPRAY. DO NOT HEAT. MAY CAUSE ALLERGIC SKIN REACTION. CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION

Relevant routes of exposure: Skin, Inhalation, Eyes

Potential Health Effects

Skin contact: Contact with skin will cause irritation.

Eye contact: Contact with eyes will cause irritation.

 

4.   First Aid Measures

Inhalation: Move to fresh air. If symptoms develop and persist, seek medical attention.

Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and shoes. Wash clothing before reuse. Seek immediate medical attention if symptoms occur.

Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention.

Ingestion: Do not induce vomiting. Keep individual calm. Seek medical attention immediately

 

5.   Fire-Fighting Measures

Flash point:105°C

Autoignition temperature: Not available

Flammable/Explosive limits-lower %: Not available

Flammable/Explosive limits-upper %: Not available

Extinguishing media: Foam, dry chemical or carbon dioxide.

Special firefighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.

Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapours. Toxic fumes.

 

6.   Accidental Release Measures

Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.

Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to cleanup. Soak up with inert absorbent. Store in a partly filled, closed container until disposal.

 

7.   Handling and storage

Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in an area provided with appropriate exhaust ventilation.

Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10.

 

8.   Exposure controls/personal protection

Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.

Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.

Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves.

Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full-face shield.

 

9. Physical and chemical properties

Physical state: Liquid Colour: transparent

Odor: light Vapor pressure: Not available pH: Not applicable Boiling point/range: Greater than 93°C (200°F) Melting point/range: Not available Specific gravity: 1.10 Vapor density: Not available Evaporation rate: Not available

Solubility in water: Slight Partition coefficient (n-octanol/water): Not available VOC content: Total volatiles 0.80 %

 

10. Stability and reactivity

Stability: Stable under normal conditions of storage and use.

Hazardous polymerization: May occur.

Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors. Incompatibility: Strong acids. Strong oxidizing agents. Bases.

Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C).

 

11.Toxicological information

Carcinogen Status

Hazardous components	NTP Carcinogen	IARC Carcinogen	COSHACarcinogen
Acrylates Copolymer	NO	NO	NO
Isobornyl Acrylate	NO	NO	NO
Dimethicone	NO	NO	NO
Hydroxypropyl Methacrylate	NO	NO	NO
Ethyl Trimethylbenzoyl Phenylphosphinate	NO	NO	NO
TMO	NO	NO	NO

 

Literature Referenced Target Organ & Other Health Effects

Hazardous components	Health Effects/Target Organs
Acrylates Copolymer	No Records
Isobornyl Acrylate	No Records
Dimethicone	No Records
Hydroxypropyl Methacrylate	No Records
Ethyl Trimethylbenzoyl Phenylphosphinate	No Records
TMO	No Records

 

12. Ecological information

Ecological information: Not available

13. Disposal consider rations

Information provided is for unused product only.

Recommended method of disposal: Dispose of according to P.R.C, province and local governmental regulations. ECE hazardous waste number: Not a RCRA hazardous waste.

14. Transport information

The shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging.

P.R.C Department of Transportation Ground :

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

International Air Transportation (ICAO/IATA):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Water Transportation (IMO/IMDG):

Proper shipping name: Unrestricted

Hazard class or division: None

Identification number: None

Packing group: None

Marine pollutant: None

15.Regulatory information

P.R.C Regulatory Information 

All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. 

Regulatory Information

This product complies with requirements within UK.

Disclaimer

Claw Culture Cosmetics Limited works tirelessly to work with established manufacturers.  It is the purchaser’s responsibility to ensure that the product is suitable for their requirements and undertake a personal Risk Assessment prior to use.  All information appearing herein is obtained from the manufacturers. While the information is believed to be accurate to the best of our knowledge and belief Claw Culture Cosmetics Limited makes no representation as to its accuracy or sufficiency. Judgement as to the suitability of products are the purchaser’s sole responsibility.