Translation missing: en.general.currency.dropdown_label

0 Cart
Added to Cart
      You have items in your cart
      You have 1 item in your cart

        Claw Culture Cosmetics Limited

        Contact Information: Claw Culture Cosmetics Limited, c/o Unit 6 Park Road Industrial Estate, BACUP, Lancashire, OL13 0BW.


        Emergency Contact Number: 07495 930061

        Product Name : Builder Gel Pink, Pretty in Pink, Cover Pink and Antique Rose

        Composition & Ingredient Information


        INCI  NAME



        % (W/T)


        Acrylate oligomers





        Acrylic acid





        2-Hydroxyethyl Methacrylate (HEMA)





        Pigment red 4











        Hazard Identification


        Colour : Red

        Odour : Light

        Harmful if swallowed, absorbed through skin or inhaled – Do not heat – May cause allergic skin reaction.  Can cause irritation to eyes, skin and respiratory tract.

        First Aid

        Product can cause irritation to skin, eyes and respiratory tract issues.  Accidental ingestion of this product is harmful to health and immediate medical attention should be sought.   Avoid skin contact or the product entering the eyes as this can cause irritation.

        Inhalation : Move to well-ventilated area – if symptoms persist seek medical attention.

        Skin contact: Immediately flush skin with water and soap – remove contaminated clothing and shoes.  If symptoms persist seek medical attention.

        Eye Contact: immediately flush eyes with water for approximately 15 minutes.  Seek medical attention. 

        Ingestion: Do not induce vomiting – keep calm – get immediate medical attention

        Fire Fighting Measures

        Flash point:105°C Autoignition temperature: Not available Flammable/Explosive limits-lower %: Not available Flammable/Explosive limits-upper %: Not available

        Extinguishing media: Foam, dry chemical, or carbon dioxide.

        Special firefighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

        Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers. Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapours. Toxic fumes.

        Accidental release measures

        Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.

        Clean-up methods: Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal.

        Handling and storage

        Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate ventilation.

        Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

        Incompatible products: Refer to Section 10.

        Exposure controls/personal protection

        Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.

        Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.

        Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves.

        Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full-face shield.

        Physical and chemical properties

        Physical state: Liquid Colour: transparent Odour: light Vapor pressure: Not available pH: Not applicable Boiling point/range: Greater than 93°C (200°F) Melting point/range: Not available Specific gravity: 1.10 Vapor density: Not available Evaporation rate: Not available Solubility in water: Slight Partition coefficient (n-octanol/water): Not available VOC content: Total volatiles 0.80 %


        Stability and reactivity

        Stability: Stable under normal conditions of storage and use. Hazardous polymerization: May occur. Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapours.

        Incompatibility: Strong acids. Strong oxidizing agents. Bases.

        Conditions to avoid: Heat, flames, sparks, and other sources of ignition. Do not heat above 26°C(80°C).

        Toxicological information Carcinogen Status Hazardous components - None

        NTP Carcinogen IARC Carcinogen COSHA Carcinogen Ethoxylated (5) pentaerythritol Tetraacrylate NO 2-Hydroxypropyl Methacrylate NO  Trimethylolpropane Triacrylate 2-Hydroxyethyl Methacrylate NO  1-Hydroxycyclohexyl Phenyl Ketone N,N-Dimethylacrylamide NO 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide NO  Phenylbis (2,4,6-Trimethylbenzoyl)Phos phine Oxide NO  Ethylene Distearamide NO Literature Referenced Target Organ & Other Health Effects Hazardous components Health Effects/Target Organs Ethoxylated (5) pentaerythritol Tetraacrylate No Records 2-Hydroxypropyl Methacrylate Trimethylolpropane Triacrylate No Records 2-Hydroxyethyl Methacrylate No Records 1-Hydroxycyclohexyl Phenyl Ketone No Records N,N-Dimethylacrylamide 2,4,6-Trimethylbenzoyldiphenyl Phosphine Oxide No Records Phenylbis(2,4,6-Trimethylbenzoyl)Phosphine No Records Oxide Ethylene Distearamide No Records

        Ecological information

        Ecological information: Not available

        Disposal considerations Information provided is for unused product only. Not classed as Hazardous Waste

        Transport information the shipping classifications in this section are for non-bulk packaging only (unless otherwise specified). Shipping classification may be different for bulk packaging.

        Regulatory Information

        All components listed or are exempt from listing on the Toxic Substances Control Act Inventory.

        Other information INCI Name CAS NO. % PIGMENT RED 4 2814-77-9 0-3 64 6371-76-2 0-3 PIGMENT VIOLET 13 81-48-1 0-3 PIGMENT RED 63:1 6417-83-0 0-3 PIGMENT RED 57 5858-81-1 0-3 PIGMENT BLUE 27 12440-15-2 0-3 PIGMENT YELLOW 3 6486-23-3 0-3 PIGMENT RED 33 3567-66-6 0-3 CI 77891 13463-67-7 0-3 Carbon black 1333-86-4 0-3 3 128-80-3 0-3


        Claw Culture Cosmetics Limited works tirelessly to work with established manufacturers.  It is the purchaser’s responsibility to ensure that the product is suitable for their requirements and undertake a personal Risk Assessment prior to use.  All information appearing herein is obtained from the manufacturers. While the information is believed to be accurate to the best of our knowledge and belief Claw Culture Cosmetics Limited makes no representation as to its accuracy or sufficiency. Judgement as to the suitability of products are the purchaser’s sole responsibility.